Denafrips Terminator II R2R DAC

This product is currently out of stock and unavailable.

SKU: N/A Categories: ,

Description

Sophisticated Design

The DAC core conversion module R-2R is constructed with 0.005% high precision, 10ppm low thermal effect precision resistors. Each channel uses more than 500pcs of these precision resistors, or 1000pcs for two channels, it’s 4 times more than the other typical R-2R DAC. These achieve a truly astonishing low distortion, full balanced design. Oven Controlled Crystal Oscillators OCXO clocks are used with FIFO buffer and reclocking – to eliminate the word-clock jitter from the sources.

Technical Highlights
  • Proprietary R2R + DSD Architecture
  • True balanced 26BIT R2R + 6BIT DSD (32 steps FIR Filters)
  • Matched Precision Thin Film 0.005% R-2R Network Arrays
  • Encapsulated Flagship Ultra Low Noise Power Supply
  • Oven Controlled Crystals OCXO
  • Adaptive FIFO Buffer Reclocking
  • New Improved Digital Signal Processing FPGA Code
  • DSD1024, PCM1536Supports On USB & I²S Input
  • Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU
  • Licensed Thesycon USB Driver For Windows Platform
  • Driverless On Mac & Linux
  • Dual AES/EBU Input Supports
  • Sharp/Slow Filters Option
  • I²S Pinout Configuration
  • I²S DSD Channel Swap Configuration
DSD
  • DSD64 (DoP) on Coax/AES/Opt Input
  • DSD1024* On USB & I²S Input Only
PCM
  • 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input
  • 1536kHz* On USB & I²S Input
NOTE*

USB Firmware V3.4.1 – PCM1536 / DSD1024 supports disabled for compatibility with macOS

Sampling Mode

Non-Oversampling NOS / Oversampling OS

Digital Input
  • Coax via RCA
  • TOSLink x 1
  • AES/EBU x 2
  • 0 Type B
  • I²S via HDMI LVDS
  • I²S via RJ45 LVDS
  • I²S via RJ45 LVCMOS
Analog Output
  • RCA at 2.0Vrms, 625 Ω
  • XLR at 4.0Vrms, 1250 Ω
Clock Output
  • 1KHz, 48KHz
  • 5774Mhz, 24.576Mhz
  • 1548MHz, 49.152Mhz
Frequency Response

20-40KHz -0.2dB

THD+N

0.0015%

S/N Ratio

127dB

Dynamic Range

>132dB

Stereo Crosstalk

-110dB

AC Power Requirement

100-240VAC, 50/60Hz (Worldwide Voltage)

Power Consumption

≤20W

Dimensions

430W x 380D x 125H mm (Including feet)

Package Dimensions

610 x 570 x 275 mm

Package Contents

DAC only. No power cord & remote control.

Weight

19 Kg

Color

Black/Silver

Warranty

36 Months

Owner’s Manual
USB Driver

For more information please visit our support page.

Featured Reviews

Denafrips Terminator II Review and Comparison

I’m not joking when I say that I could completely picture Jordan striking the steel drum, ranging between medium speed to somewhat fast strikes with mallets in both hands. I’d never heard this level of detail previously. It gave me a whole new take on the track because it was just more real.
Credit: Chris @ Audiophile Style

Read More